Quaternium-18 and Quaternium-18 Bentonite.

The Expert Panel for Cosmetic Ingredient Safety reviewed newly available studies since their original assessment in 1982, along with updated information regarding product types and concentrations of use, and confirmed that Quaternium-18 and Quaternium-18 Bentonite are safe as cosmetic ingredients in the practices of use and concentration as described in this report.

Microplastics exhibit lower carrying effects on the bioaccessibility and cytotoxicity of lead than montmorillonite clay particles.

Microplastics (MPs) in the environment are always colonized by microbes, which may have implications for carrying effect of pollutants and exposure risk in organisms. We present the crucial impacts and mechanisms of microbial colonization on the bioaccessibility and toxicity of Pb(II) loaded in disposable box-derived polypropylene (PP) and polystyrene (PS) MPs and montmorillonite (MMT) clay particles. After 45 d incubation, higher biomass measured by crystal violet staining were detected in MMT (1.23) than in PP and PS (0.400 and 0.721) indicating preferential colonization of microbes in clay particles. Microbial colonization further enhanced the sorption ability toward Pb(II), but inhibited the desorption and bioaccessibility of enriched Pb(II) in zebrafish and decreased the toxicity to gastric epithelial cells in an order of MMT > PS ≈ PP. The crucial effects were mainly because microbe-colonized substrates possessed higher oxygen functional groups and specific surface area and exhibited stronger interactions with Pb(II) and digestive component (i.e., pepsin) than pure substrates. This decreased the available soluble pepsin for complexing with sorbed Pb(II). The findings highlight the role of microbial colonization in modulating the exposure risks of artificial and natural substrate-associated pollutants and suggest that the risks of MPs may be overestimated compared to clay particles.

Ecotoxicity of Diazinon and Atrazine Mixtures after Ozonation Catalyzed by Na+ and Fe2+ Exchanged Montmorillonites on Lemna minor.

The toxicity of two pesticides, diazinon (DAZ) and atrazine (ATR), before and after montmorillonite-catalyzed ozonation was comparatively investigated on the duckweed Lemna minor. The results allowed demonstrating the role of clay-containing media in the evolution in time of pesticide negative impact on L. minor plants. Pesticides conversion exceeded 94% after 30 min of ozonation in the presence of both Na+ and Fe2+ exchanged montmorillonites. Toxicity testing using L. minor permitted us to evaluate the change in pesticide ecotoxicity. The plant growth inhibition involved excessive oxidative stress depending on the pesticide concentration, molecular structure, and degradation degree. Pesticide adsorption and/or conversion by ozonation on clay surfaces significantly reduced the toxicity towards L. minor plants, more particularly in the presence of Fe(II)-exchanged montmorillonite. The results showed a strong correlation between the pesticide toxicity towards L. minor and the level of reactive oxygen species, which was found to depend on the catalytic activity of the clay minerals, pesticide exposure time to ozone, and formation of harmful derivatives. These findings open promising prospects for developing a method to monitor pesticide ecotoxicity according to clay-containing host-media and exposure time to ambient factors.

Does Bentonite Cause Cytotoxic and Whole-Transcriptomic Adverse Effects in Enterocytes When Used to Reduce Aflatoxin B1 Exposure?

Aflatoxin B1 (AFB1) is a major food safety concern, threatening the health of humans and animals. Bentonite (BEN) is an aluminosilicate clay used as a feed additive to reduce AFB1 presence in contaminated feedstuff. So far, few studies have characterized BEN toxicity and efficacy in vitro. In this study, cytotoxicity (WST-1 test), the effects on cell permeability (trans-epithelial electrical resistance and lucifer yellow dye incorporation), and transcriptional changes (RNA-seq) caused by BEN, AFB1 and their combination (AFB1 + BEN) were investigated in Caco-2 cells. Up to 0.1 mg/mL, BEN did not affect cell viability and permeability, but it reduced AFB1 cytotoxicity; however, at higher concentrations, BEN was cytotoxic. As to RNA-seq, 0.1 mg/mL BEN did not show effects on cell transcriptome, confirming that the interaction between BEN and AFB1 occurs in the medium. Data from AFB1 and AFB1 + BEN suggested AFB1 provoked most of the transcriptional changes, whereas BEN was preventive. The most interesting AFB1-targeted pathways for which BEN was effective were cell integrity, xenobiotic metabolism and transporters, basal metabolism, inflammation and immune response, p53 biological network, apoptosis and carcinogenesis. To our knowledge, this is the first study assessing the in vitro toxicity and whole-transcriptomic effects of BEN, alone or in the presence of AFB1.

Clay Types Modulate the Toxicity of Low Concentrated Copper Oxide Nanoparticles Toward Springtails in Artificial Test Soils.

Copper oxide nanoparticles (CuO-NPs) can be applied as an efficient alternative to conventional Cu in agriculture. Negative effects of CuO-NPs on soil organisms were found, but only in clay-rich loamy soils. It is hypothesized that clay-NP interactions are the origin of the observed toxic effects. In the present study, artificial Organisation for Economic Co-operation and Development soils containing 30% of kaolin or montmorillonite as clay type were spiked with 1-32 mg Cu/kg of uncoated CuO-NPs or CuCl2 . We performed 28-day reproduction tests with springtails of the species Folsomia candida and recorded the survival, reproduction, dry weight, and Cu content of adults. In a second experiment, molting frequency and the Cu content of exuviae, as well as the biochemical endpoints metallothionein and catalase (CAT) in springtails, were investigated. In the reproduction assay, negative effects on all endpoints were observed, but only in soils containing montmorillonite and mostly for CuO-NPs. For the biochemical endpoints and Cu content of exuviae, effects were clearly distinct between Cu forms in montmorillonite soil, but a significant reduction compared to the control was only found for CAT activity. Therefore, the reduced CAT activity in CuO-NP-montmorillonite soil might be responsible for the observed toxicity, potentially resulting from reactive oxygen species formation overloading the antioxidant system. This process seems to be highly concentration-dependent, because all endpoints investigated in reproduction and biochemical assays of CuO-NP-montmorillonite treatments showed a nonlinear dose-response relationship and were constantly reduced by approximately 40% at a field-realistic concentration of 3 mg/kg, but not at 32 mg/kg. The results underline that clay-CuO-NP interactions are crucial for their toxic behavior, especially at low, field-realistic concentrations, which should be considered for risk assessment of CuO-NPs. Environ Toxicol Chem 2022;41:2454-2465. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

An in vitro assessment of the toxicity of two-dimensional synthetic and natural layered silicates.

Natural Layered Silicates (NLS) and Synthetic Layered Silicates (SLS) are a diverse group of clay minerals that have attracted great interest in various branches of industry. However, despite growing demand for this class of material, their impact on human health has not been fully investigated. Therefore, the aim of this study was to evaluate and compare the potential toxic effects of a wide range of commercially available SLS and NLS of varying physicochemical properties (lithium (Li) or fluoride (F) content and size). Mouse BALB/c monocyte macrophage (J774A.1) and human monocyte-derived macrophages (MDMs) were chosen as in vitro models of alveolar macrophages. Montmorillonite, hectorite, Medium (med) F/High Li and Low F/Med Li particles, were cytotoxic to cells and induced potent pro-inflammatory responses. The remaining particles (No F/Very (V)Low Li, No F/Med Li, No F/Low Li, High F/Med Li and High F/Med Li washed) were non- to relatively low- cytotoxic and inflammogenic, in both type of cells. In an acellular condition none of the tested samples increased reactive oxygen species (ROS), while ROS generation was observed following exposure to sublethal concentrations of Med F/High Li, Low F/Med Li, montmorillonite and hectorite samples, in J774A.1 cells. Based on the results obtained in this study the toxic potency of tested samples was not associated with lithium or fluoride content, but appeared to be dependent on particle size, with the platelets of larger dimension and lower surface area being more potent than the smaller platelet particles with higher surface area. In addition, the increased bioactivity of Med F/High Li and Low F/Med Li was associated with endotoxin contamination. Obtained results demonstrated that layered silicate materials have different toxicological profiles and suggest that toxicological properties of a specific layered silicate should be investigated on an individual basis.

Controlled release, antimicrobial activity, and oral mucosa irritation of cetylpyridinium chloride-montmorillonite incorporated in a tissue conditioner.

This study examined the controlled release of cetylpyridinium chloride (CPC) from a tissue conditioner (TC) containing CPC-montmorillonite (CPC-Mont), the associated antimicrobial activity, and oral mucosa irritation. The CPC release test was performed daily for 28 days in three test solutions: distilled water, 0.2 M NaCl, and 0.2 M HCl. The antimicrobial activities for 7, 14, 21, and 28 days against Candida albicans, Staphylococcus aureus, and Streptococcus mutans were assessed according to the JIS Z 2801/ISO 22196 standard. An oral mucosa irritation test was conducted using cheek pouches in five male hamsters according to the ISO 10993-10:2010 standard. The amount of CPC released each day and the cumulative amount released over 28 days (6.12 mg) were less than the daily safe maximum of sore throat medicines (8 mg). Additionally, TC with CPC-Mont could sustain antimicrobial activity against adherent bacteria for 14 days and has no oral mucosa irritation potential.

Testing the efficacy of broad-acting sorbents for environmental mixtures using isothermal analysis, mammalian cells, and H. vulgaris.

The hazards associated with frequent exposure to polycyclic aromatic hydrocarbons (PAHs), pesticides, Aroclors, plasticizers, and mycotoxins are well established. Adsorption strategies have been proposed for the remediation of soil and water, although few have focused on the mitigation of mixtures. This study tested a hypothesis that broad-acting sorbents can be developed for diverse chemical mixtures. Adsorption of common and hazardous chemicals was characterized using isothermal analysis from Langmuir and Freundlich equations. The most effective sorbents included medical-grade activated carbon (AC), parent montmorillonite clay, acid-processed montmorillonite (APM), and nutrient-amended montmorillonite clays. Next, we tested the ability of broad-acting sorbents to prevent cytotoxicity of class-specific mixtures using 3 mammalian in vitro models (HLF, ESD3, and 3T3 cell lines) and the hydra assay. AC showed the highest efficacy for mitigating pesticides, plasticizers, PAHs, and mycotoxins. Clays, such as APM, were effective against pesticides, Aroclors, and mycotoxins, while amended clays were most effective against plasticizers. Finally, a sorbent mixture was shown to be broadly active. These results are supported by the high correlation coefficients for the Langmuir model with high capacity, affinity, and free energy, as well as the significant protection of cells and hydra (p < 0.05). The protection percentages in 3T3 cells and hydra showed the highest correlation as suggested by both Pearson and Spearman with r = 0.84 and rho = 0.73, respectively (p < 0.0001). Collectively, these studies showed that broad-acting sorbents may be effective in preventing toxic effects of chemical mixtures and provided information on the most effective sorbents based on adsorption isotherms, and in vitro and aquatic organism test methods.

Organomodified nanoclays induce less inflammation, acute phase response, and genotoxicity than pristine nanoclays in mice lungs.

Surface modification by different quaternary ammonium compounds (QAC) makes nanoclays more compatible with various polymeric matrices, thereby expanding their potential applications. The growing industrial use of nanoclays could potentially pose a health risk for workers. Here, we assessed how surface modification of nanoclays modulates their pulmonary toxicity. An in vitro screening of the unmodified nanoclay Bentonite (montmorillonite) and four organomodified nanoclays (ONC); coated with various QAC, including benzalkonium chloride (BAC), guided the selection of the materials for the in vivo study. Mice were exposed via a single intratracheal instillation to 18, 54, and 162 µg of unmodified Bentonite or dialkyldimethyl-ammonium-coated ONC (NanofilSE3000), or to 6, 18, and 54 µg of a BAC-coated ONC (Nanofil9), and followed for one, 3, or 28 days. All materials induced dose- and time-dependent responses in the exposed mice. However, all doses of Bentonite induced larger, but reversible, inflammation (BAL neutrophils) and acute phase response (Saa3 gene expression in lung) than the two ONC. Similarly, highest levels of DNA strand breaks were found in BAL cells of mice exposed to Bentonite 1 day post-exposure. A significant increase of DNA strand breaks was detected also for NanofilSE3000, 3 days post-exposure. Only mice exposed to Bentonite showed increased Tgf-ß gene expression in lung, biomarker of pro-fibrotic processes and hepatic extravasation, 3 days post-exposure. This study indicates that Bentonite treatment with some QAC changes main physical-chemical properties, including shape and surface area, and may decrease their pulmonary toxicity in exposed mice.

Effects and recovery of larvae of the cold-water coral Lophelia pertusa (Desmophyllum pertusum) exposed to suspended bentonite, barite and drill cuttings.

Fossil fuel drilling operations create sediment plumes and release waste materials into the ocean. These operations sometimes occur close to sensitive marine ecosystems, such as cold-water corals. While there have been several studies on the effects of energy industry activities on adult corals, there is very little information on potential impacts to their early life history stages. Larval stages of many marine organisms, including cold-water corals use cilia as a means of feeding and swimming, and if these structures become clogged with suspended particulates, the larvae may sink and be lost to the system. The objective of this study was to understand the response of Lophelia pertusa larvae to a different drilling waste components, and assess post-exposure recovery. Larvae of two ages (eight and 21 days) were exposed to a range of concentrations of bentonite, barite and drill cuttings. Larval sensitivity was assessed using the concentration at which 50% of the larvae showed behavioral effects (EC50) or lethal effects (LC50). Larvae showed greatest sensitivity to bentonite, followed by barite and drill cuttings, and also showed age-related responses that differed among the test materials. Post exposure recovery was variable across materials, with larvae exposed to bentonite having the lowest recovery rates. Understanding the vulnerability of early life history stages to human activities can help inform management strategies to preserve reproductive capacity of important marine ecosystems.

Use of lanthanum for water treatment A matter of concern?

Among several other eutrophication management tools, Phoslock®, a lanthanum modified bentonite (LMB) clay, is now frequently used. Concerns have been raised as to whether exposure to Phoslock®-treated water may lead to lanthanum accumulation/toxicity in both animals and humans. In the present experimental study, rats were administered lanthanum orally as either lanthanum carbonate, lanthanum chloride or Phoslock® at doses of either 0.5 or 17 mg/L during 10 weeks. Controls received vehicle. The gastrointestinal absorption and tissue distribution of lanthanum was investigated. Extremely strict measures were implemented to avoid cross-contamination between different tissues or animals. Results showed no differences in gastrointestinal absorption between the different compounds under study as reflected by the serum lanthanum levels and concentrations found in the brain, bone, heart, spleen, lung, kidney and testes. At sacrifice, significant but equally increased lanthanum concentrations versus vehicle were observed in the liver for the highest dose of each compound which however, remained several orders of magnitude below the liver lanthanum concentration previously measured after long-term therapeutic administration of lanthanum carbonate and for which no hepatotoxicity was noticed in humans. In conclusion, (i) the use of LMB does not pose a toxicity risk (ii) gastrointestinal absorption of lanthanum is minimal and independent on the type of the compound, (iii) with exception of the liver, no significant increase in lanthanum levels is observed in the various organs under study, (iv) based on previous studies, the slightly increased liver lanthanum levels observed in a worst case scenario do not hold any risk of hepatotoxicity.

Quaternized Chitosan-Coated Montmorillonite Interior Antimicrobial Metal-Antibiotic in Situ Coordination Complexation for Mixed Infections of Wounds.

Conventional drug delivery systems for natural clay materials still face critical challenges in their practical application, including multiple bacterial infections, combined infection of bacteria and fungi, and low sterilization efficiency. In this work, we address these challenges using the multifunctional montmorillonite nanosheet-based (MMT-based) drug nanoplatform, which involves the antibiotic 5-fluorocytosine (5-FC), antibacterial metal copper ions, and quaternized chitosan (QCS). Composite material QCS/MMT/5-FCCu can can strongly inhibit Staphylococcus aureus (a typical Gram-positive bacterium), Escherichia coli (a typical Gram-negative bacterium), and Candida albicans (a fungus) because 5-FC coordinates with copper ions in situ and due to the deposition of QCS. The subsequent drug release behavior of 5-FCCu was studied, and the results show an initial high concentration kills microorganisms and long-acting sustained release inhibition. Moreover, in vivo wound experiments and toxicity experiments show the promotion of wound healing and excellent biocompatibility. As a demonstration of the utility of the latter, we have shown that the MMT-based smart platform can be used for the treatment of mixed infections of wounds.

Impacts of Organomodified Nanoclays and Their Incinerated Byproducts on Bronchial Cell Monolayer Integrity.

Incorporation of engineered nanomaterials (ENMs) into nanocomposites using advanced manufacturing strategies is set to revolutionize diverse technologies. Of these, organomodified nanoclays (ONCs; i.e., smectite clays with different organic coatings) act as nanofillers in applications ranging from automotive to aerospace and biomedical systems. Recent toxicological evaluations increased awareness that exposure to ONC can occur along their entire life cycle, namely, during synthesis, handling, use, manipulation, and disposal. Compared to other ENMs, however, little information exists describing which physicochemical properties contribute to induced health risk. This study conducted high content screening on bronchial epithelial cell monolayers for coupled high-throughput in vitro assessment strategies aimed to evaluate acute toxicity of a library of ONCs (all of prevalent use) prior to and after simulated disposal by incineration. Coating-, incineration status-, and time-dependent effects were considered to determine changes in the pulmonary monolayer integrity, cell transepithelial resistance, apoptosis, and cell metabolism. Results showed that after exposure to each ONC at its half-maximal inhibitory concentration (IC50) there is a material-induced toxicity effect with pristine nanoclay, for instance, displaying acute loss of monolayer coverage, resistance, and metabolism, coupled with increased number of apoptotic cells. Conversely, the other three ONCs tested displayed little loss of monolayer integrity; however, they exhibited differential coating-dependent increased apoptosis and up to 40-45% initial reduction in cell metabolism. Moreover, incinerated byproducts of ONCs exhibited significant loss of monolayer coverage and integrity, increased necrosis, with little evidence of monolayer re-establishment. These findings indicate that characteristics of organic coating type largely determine the mechanism of cytotoxicity and the ability of the monolayer to recover. Use of high content screening coupled with traditional in vitro assays proves to serve as a rapid pulmonary toxicity assessment tool to help define prevention by targeted physicochemical material properties design strategies.

Does exposure to bentonite dust during tunnel hyperbaric interventions increase health risks for compressed air workers? A prospective qualitative and quantitative safety assessment.

INTRODUCTION: The mining and tunneling industries are historically associated with hazardous exposures that result in significant occupational health concerns. Occupational respiratory exposures causing pneumoconiosis and silicosis are of great concern, silicosis being non-curable. This work demonstrates that compressed-air workers (CAWs) performing tunnel hyperbaric interventions (HIs) may be at risk for hazards related to bentonite exposure, increasing the likelihood of developing harmful illnesses including cancer. Bentonite dust inhalation may result in respiratory levels of silica exceeding acceptable industrial hygiene standards. METHODS: A qualitative observational exposure assessment was conducted on CAWs while they were performing their HI duties. This was followed by quantitative data collection using personal and area air sample techniques. The results were analyzed and interpreted using standard industrial hygiene principles and guidelines from NIOSH and OSHA. RESULTS: Our work suggests bentonite dust exposure may be an emerging particulate matter concern among CAWs in the tunneling industry. Aerosolized bentonite particles may have potential deleterious effects that include pneumoconiosis and silicosis. Silicosis can result in the development of pulmonary carcinoma. CONCLUSIONS: The modern tunneling industry and required hyperbaric interventional tasks represent a potential public health and occupational concern for CAWs. This paper introduces the modern tunneling industry and the duties of CAWs, the hazardous environment in which they perform their duties, and describes the risks and potential harmful health effects associated with these hazardous exposures.

Highly efficient flame-retardant and low-smoke-toxicity poly(vinyl alcohol)/alginate/ montmorillonite composite aerogels by two-step crosslinking strategy.

A highly efficient flame-retardant and ultra-low-smoke-toxicity biodegradable material, poly(vinyl alcohol) (PVA)/alginate/montmorillonite (MMT) composite aerogel, was fabricated by a new environment-friendly two-step crosslinking strategy using borate and calcium ions. Compressive and specific moduli of the crosslinked PVA/alginate/MMT (P4A4M4/BA/Ca) aerogel increased to 7.2- and 1.9-folds those of the non-crosslinked aerogel, respectively, and the limited oxygen index value increased to 40.0%. Cone calorimeter tests revealed that the total heat release and peak heat release rate values of the P4A4M4/BA/Ca composite aerogel distinctly decreased. Remarkably, the total smoke release value of the P4A4M4/BA/Ca aerogel was considerably lower than those of non-crosslinked PVA composite aerogels, indicating its superior smoke suppression ability and high fire hazardous safety. The flame-retardancy mechanism of the crosslinked P4A4M4/BA/Ca composite aerogels involved a combination of the gaseous phase and condensed phase flame retardancy. The high-performance PVA/alginate/MMT biodegradable composite aerogels with good sustainability is a promising alternative to conventional flame-retardant foams.

Lanthanum-modified drinking water treatment residue for initial rapid and long-term equilibrium phosphorus immobilization to control eutrophication.

This study presents an approach for developing inactivating materials to achieve an initial rapid and a long-term equilibrium P immobilization to control eutrophication based on drinking water treatment residue (DWTR), which is a byproduct of potable water production. By taking advantage of the long-term equilibrium P adsorption by DWTR, the La chemical properties, and the previous success of using La-modified bentonite clay (Phoslock®), we used DWTR as a La carrier with different ratios to develop the specific materials. The La loading mechanisms, the potentially toxic effect of La-modified DWTR on snail Bellamya aeruginosa (within 120 d), and the short- and long-term (within 80 d) P immobilization characteristics of the modified DWTR were investigated to understand the performance of the developed materials. The results showed that La loading into DWTR was based on ligand exchanges and the formation of new particles; DWTR loaded with <5% La had no toxicity against the snail. Most importantly, the loading of 5% La to DWTR substantially enhanced the rapid immobilization capacity of DWTR, achieving an initial rapid and a long-term equilibrium P adsorption in aqueous solutions. This study promotes the beneficial recycling of DWTR and results in a win-win situation for lake restoration.

Short-Term Pulmonary Toxicity Assessment of Pre- and Post-incinerated Organomodified Nanoclay in Mice.

Organomodified nanoclays (ONCs) are increasingly used as filler materials to improve nanocomposite strength, wettability, flammability, and durability. However, pulmonary risks associated with exposure along their chemical lifecycle are unknown. This study's objective was to compare pre- and post-incinerated forms of uncoated and organomodified nanoclays for potential pulmonary inflammation, toxicity, and systemic blood response. Mice were exposed via aspiration to low (30 µg) and high (300 µg) doses of preincinerated uncoated montmorillonite nanoclay (CloisNa), ONC (Clois30B), their respective incinerated forms (I-CloisNa and I-Clois30B), and crystalline silica (CS). Lung and blood tissues were collected at days 1, 7, and 28 to compare toxicity and inflammation indices. Well-dispersed CloisNa caused a robust inflammatory response characterized by neutrophils, macrophages, and particle-laden granulomas. Alternatively, Clois30B, I-Clois30B, and CS high-dose exposures elicited a low grade, persistent inflammatory response. High-dose Clois30B exposure exhibited moderate increases in lung damage markers and a delayed macrophage recruitment cytokine signature peaking at day 7 followed by a fibrotic tissue signature at day 28, similar to CloisNa. I-CloisNa exhibited acute, transient inflammation with quick recovery. Conversely, high-dose I-Clois30B caused a weak initial inflammatory signal but showed comparable pro-inflammatory signaling to CS at day 28. The data demonstrate that ONC pulmonary toxicity and inflammatory potential relies on coating presence and incineration status in that coated and incinerated nanoclay exhibited less inflammation and granuloma formation than pristine montmorillonite. High doses of both pre- and post-incinerated ONC, with different surface morphologies, may harbor potential pulmonary health hazards over long-term occupational exposures.

In vitro toxicity evaluation of new silane-modified clays and the migration extract from a derived polymer-clay nanocomposite intended to food packaging applications.

The clay montmorillonite (Mt) is among the nanofillers more frequently used for food packaging applications. The organomodification of clays with different modifiers, such as silanes, is an important step in the preparation of improved polymer/clay materials known as nanocomposites. However, the toxicological data about these nanofillers is still scarce. In the present study, an in vitro toxicological evaluation in Caco-2 cells of two silane-modified clays based on Mt, Clay3 and Clay4 (0-250µg/ml), was performed. The cytotoxicity, cell death, genotoxicity and oxidative stress produced by both organoclays were evaluated after 24 and 48h of exposure. Moreover, the migration extracts obtained from nanocomposites of polypropylene (PP) + Clay3 and only PP were also investigated. Only Clay4 induced cytotoxicity, showing a reduction of cell viability to 63% of the control, as well as oxidative stress in a concentration-dependent manner. Regarding the PP-Clay3 migration extract, no cytotoxic effects were observed after exposure to the tested concentrations (0-100%). Moreover, significant differences in the presence of Ca, Mg and Si compared to the PP extract were obtained, although migration levels were in accordance with the food contact materials regulation. These findings indicate that a case-by-case toxicological assessment of organoclays should be performed.

Effects of silver adsorbed on fumed silica, silver phosphate glass, bentonite organomodified with silver and titanium dioxide in aquatic indicator organisms.

In order to reduce the level of transmission of diseases caused by bacteria and fungi, the development of antimicrobial additives for use in personal care, hygiene products, clothing and others has increased. Many of these additives are based on metals such as silver and titanium. The disposal of these products in the environment has raised concerns pertaining to their potential harmfulness for beneficial organisms. The objective of this study was to evaluate the influence of the shape, surface chemistry, size and carrier of three additives containing silver and one with titanium dioxide (TiO2) on microcrustacean survival. Daphnia magna was used as a bioindicator for acute exposure test in suspensions from 0.0001 to 10,000ppm. Ceriodaphnia dubia was used for chronic test in TiO2 suspensions from 0.001 to 100ppm. D. magna populations presented high susceptibility to all silver based additives, with 100% mortality after 24hr of exposure. A different result was found in the acute experiments containing TiO2 suspensions, with mortality rates only after 48hr of incubation. Even on acute and chronic tests, TiO2 did not reach a linear concentration-response versus mortality, with 1ppm being more toxic than 10,000ppm on acute test and 0.001 more toxic than 0.01ppm on chronic assay. Silver based material toxicity was attributed to silver itself, and had no relation to either form (nano or ion) or carrier (silica, phosphate glass or bentonite). TiO2 demonstrated to have a low acute toxicity against D. magna.

Bentonite toxicology and epidemiology - a review.

Bentonite, a clay with numerous industrial and consumer applications, is mined and processed in many countries of the world. Its many beneficial uses also create the potential for widespread occupational and consumer exposure. The available studies on toxicity and epidemiology indicate that the principal exposure pathway of concern is inhalation of respirable dust by occupationally exposed cohorts. Bentonite itself is probably not more toxic than any other particulate not otherwise regulated and is not classified as a carcinogen by any regulatory or advisory body, but some bentonite may contain variable amounts of respirable crystalline silica, a recognized human carcinogen. Therefore, prudent management and adherence to occupational exposure limits is appropriate. This review summarizes the literature available on production, applications, exposure, toxicity, and epidemiology of bentonite and identifies data gaps and limitations.